VareNr 720-633
Self adhesive vinyl film, mat-white, for indoor / outdoor applications
Permanently adhesive vinyl films with a mat-white surface. The coating excels
through its very good water and wet scrub resistance, making it especially suitable
for outdoor applications. The high formability of the material gives it optimum
properties for moulding around curves and surfaces.
THERMAL PIEZO PIGMENT DYE
INSTANT
DRY
Characteristic
Suitable for Thermal printers
Suitable for Piezo printers
Suitable for Pigment Ink which offers improved light
Suitable for Dye Ink
Instant dry coating
Improved water resistance
Brilliant colour prints
Good cutting and adhesive properties
High resolution
Weather proof prints
Excellent outstanding durability of the prints when using pigmented inks
Permanent adhesive on the back
Film can be peeled off using hot air, withoug leaving adhesive residues
Finish
Matt white Surface
Specifications
Coating frontside For Ink Jet
Print side Matt White side
Back side Self adhesive with paper release liner
Base material Vinyl
Width (mm) 610
Length (m) 20
Width (inch) 24
Length (ft) 65.62
Base/Nominal thickness (mm) 0.150
Base/Nominal thickness (mil) 6
Packing quantity 1
Compatibility
Useable on most large-format Ink Jet printers using Pigmented ink systems. Limited
suitability with when using dye inks.
Not compatible with oil and solvent based systems.
Handling
Please observe the specifications for your printer and the RIP software.
A preconditioning period of 24 hours within the printing environment is
recommended.
Ink Load: approx. 250 - 290 % (may vary according to iink system).
Between 15-30°C and 30-70% r.h.
Printer set-up: vinyl, coated paper, or similar
Printing quality: “best”, “high“, or similar
The good water resistance of the material makes it suitable for outdoor applications
without the need for lamination. For a high durability where abrasion and dirt are
likely, we recommend using a protective laminate. The weather resistance (light,
moisture) of the prints primarily depends on the properties of the ink applied.
Avoid fingerprints on printing side.
Storage
Unopened in original packaging storage time is minimum 1 year after shipment
(under recommended storage conditions).
Store in a cool and dry place at a room temperature of 15 - 25°C and at a humidity of
30 - 60%.
Further Articles
Rolls
Art. Number Base/Nominal
thickness (mm)
Width
(mm)
Length
(m)
21204.150.35900 0.150 610 20
21204.150.39000 0.150 914 20
21204.150.32000 0.150 1270 20
|
På vej 
|
Ikke lager